Fastest way to a quote: email your current policies (GL, comp with any USL&H endorsement), five years of loss runs, your receipts, your payroll split between shop and land-side work and work on or over the water, a short description of your trade and where you work — your own shop, mobile, at marinas — and the insurance requirements from a marina or shipyard you work at, to adolfo@nextguardinsurance.com. Marine underwriters need the full picture, and one complete submission moves faster than ten phone calls.
Please send your account to one broker. The marine market is small; when several brokers submit the same account to the same underwriters, the account gets blocked and quotes slow down.
A marine artisan is not a marine contractor. You are not building the marina — you are the specialist the marina, the yard and the boat owner call when the work is inside the boat: repair, refit, rigging, systems, canvas, engines. If you build docks, drive piles or dredge, that program lives on our marine contractors insurance page. This page is for the trades below, shop-based or mobile, anywhere in New York.

Haul-out work, structural repair, refits and recommissioning — with ship repairer’s liability for the vessels on your stands.
→
Blister and laminate work, gelcoat, transom and stringer repair — the completed-operations exposure that surfaces a season later.
→
Standing and running rigging, mast work and stepping — height exposure on land and aboard, priced and covered as both.
→
Shore power, panels, chargers, electronics and repowers — where one fault can become a fire claim on someone else’s boat.
→
Inboard, outboard and diesel service, winterization and spring commissioning — including the sea trial after the work.
→
Enclosures, biminis, cushions and interiors — lower-hazard work that still needs the marina’s certificate to get on site.
→Detailing and wash-down crews, painters and varnishers, marine carpenters and joiners, and winterization and storage-prep crews round out the artisan list. If your trade touches boats at a yard, a marina or a customer’s dock anywhere from Long Island and the five boroughs to the Hudson River and the Great Lakes, this is your page.
An artisan program is a package, not a single policy. Each piece answers a gap the others leave:
$1M/$2M is the working floor — the limit marinas and shipyards ask for by name. Covers third-party injury and property damage from your land-side and shop operations, with additional insured and waiver wording for the facilities you work at.
The marine form of liability, built for waterfront operations a standard CGL is not. The MGL endorsement is what marina vendor requirements actually name — see the full comparison on our marine general liability page.
The core artisan coverage. Standard GL excludes property in your care, custody or control — which is the customer’s boat, all day, every day. Ship repairer’s liability covers that vessel while it is in your shop, on your stands, in your slings and on sea trials.
If you run the yard, the storage operation or the haul-out — or a marina’s program puts its liability requirements on you — MOLL covers the liability that comes with storing, hauling, launching and moving other people’s boats as an operation, not a repair job.
Your diagnostic gear, specialty tools, compressors and shop equipment — covered in the shop, in the truck and at the marina, where a GL policy does not follow them. Mobile trades live on this line.
New York state-act comp for shop and land-side payroll, the federal USL&H endorsement for work on or over the water, and Maritime Employers Liability where a hand assigned to a vessel — sea trials, deliveries, workboat duty — could count as a Jones Act seaman. Details on our USL&H insurance New York page.
Service trucks, vans and trailers, plus hired and non-owned auto for the parts run and the customer’s truck you move around the yard.
If the shop runs its own workboat, launch or push boat, hull covers the boat and P&I covers the liability of operating it — the same stack the big contractors carry, sized to a workboat.
Ask a boat repair underwriter what the claim is and the answer is consistent: the customer’s vessel, while it is yours to protect. A boat that falls off its stands, a fire that starts during a repair, a through-hull that lets go after launch — the loss is measured against the value of a boat you do not own, sitting in your care. Two things decide whether your program answers:
The care, custody or control gap. A standard CGL excludes damage to property in your care, custody or control. For a repair shop, that exclusion swallows the main exposure whole. Ship repairer’s legal liability exists precisely for this — it is written on the vessel in your hands, including while it is hauled, blocked, stored awaiting work and out on a sea trial after the job.
An honest description of operations. Carriers rate the work you describe: mechanical, fiberglass, rigging, electrical, paint, storage. Work outside the description — the fuel-system job a canvas shop takes on, the structural repair a detailer attempts — is work outside the policy’s comfort. List everything the shop actually does, including the seasonal work: winterization, shrink wrap, spring commissioning.
Mobile repair trades carry the same exposure with one addition: the work happens at the marina, under the marina’s rules and the marina’s certificate requirements — which is where most artisans meet their insurance problem first.
Most marine artisans do not shop for insurance because they read a statute. They shop because a marina or shipyard handed them a vendor packet. The requirements are remarkably consistent across New York yards:
Send us the vendor packet before the season starts — or before you sign the yard agreement. Matching a certificate to a packet is a same-week job when the program is built right, and a scramble when the GL you bought online has no marine endorsement to give.
The federal Longshore and Harbor Workers’ Compensation Act covers employees in maritime employment — the statute’s own list includes anyone employed in loading, unloading, repairing, dismantling or building a vessel — who are injured on navigable waters or an adjoining pier, wharf, dry dock, terminal, building way, marine railway or other adjoining area used in that work. Repairing vessels is named in the Act. A diesel mechanic on a sea trial, a rigger stepping a mast at the dock, a fiberglass crew working a hull at the marina — each can meet the status and situs tests even though the shop itself sits on land.
Three consequences matter to an artisan:
Two boundaries keep the picture honest. First, the Longshore Act’s marina exclusion does not rescue repair work the way owners sometimes hope, and it expressly does not apply to construction, replacement or expansion of a marina. Second, crew assigned to a vessel in navigation — the hand running your workboat or delivering a customer’s boat — may be a Jones Act seaman instead, outside both state comp and Longshore; that is what Maritime Employers Liability answers. The full status, situs and pricing breakdown lives on our USL&H insurance New York page.
On the land side, New York law still runs in the yard: Labor Law §240 and §241(6) reach ladder, scaffold and stand work, and the action-over exclusion question — whether your GL responds when an injured employee’s claim comes back to you through the marina’s or owner’s contract — has to be checked on the form before you bind, not after a fall. Payroll is classified by the work each person does, at NYCIRB loss costs effective October 1, 2026 — marine carpentry and joinery, for example, prices off carpentry NOC (5403) at $11.232 per $100 of payroll before the insurer’s multiplier, your experience mod and any USL&H factor.
Artisan insurance is priced in minimums, not in the program dollars the big marine contractors pay — and that cuts both ways. Shipwright and boat-repairer packages are written at minimum premiums from about $1,500, so a one- or two-person shop’s GL, MGL and ship repairer’s stack starts at a floor, not at a percentage of receipts. The honest exception is federal exposure: where the work carries real USL&H exposure, Longshore programs start at minimum premiums around $10,000 — which is why the payroll split matters more than the premium quote. A shop that is 90% land-side should not be priced like a crew that lives on the docks, and the submission is where that gets proven. We frame your range once we see the trade, the receipts and the split — and we show the full premium, every fee and tax included, before you decide. For how New York marine program pricing is built, line by line, see our marine contractor insurance cost guide.

NextGuard is a specialty commercial insurance agency licensed in New York and Florida. Our marine desk places the full waterfront cluster — contractors, marinas, vessels and the artisan trades that work on them — so the certificate a marina demands from you is a document we already know how to build.
Quote in 48 hours once your submission is complete.
The form, WhatsApp or a call: your trade, where you work — shop, mobile, which marinas — your crew and your receipts.
One complete submission to the marine markets that write New York artisans — GL, MGL, ship repairer’s, comp and USL&H lined up together, options side by side at the full price.
Certificates go out with the additional insured, MGL and USL&H wording your marina or shipyard packet requires.
★★★★★
Contractors and marine trades across New York and Florida trust NextGuard to read the contract, match the coverage to the work and get certificates right the first time — in English, Spanish or Portuguese.
Most boat repair shops need general liability plus marine general liability, ship repairer’s legal liability for customers’ boats in your care, tools and equipment coverage, commercial auto, and workers’ comp — with a USL&H endorsement if anyone works on, over or next to navigable water. If you run the yard or the storage operation, marina operators legal liability belongs in the package too. The exact stack depends on whether you work in your own shop, at marinas, or both.
It is the coverage that answers when a customer’s vessel is damaged while it is in your care, custody or control — in your shop, on your stands, in your slings or on a sea trial. A standard general liability policy excludes property in your care, custody or control, which means the boat you were hired to fix can be the one thing your GL does not cover. Ship repairer’s legal liability is written for exactly that exposure and is the core coverage of a marine artisan program.
Often, yes — even for small shops. The federal Longshore Act covers employees in maritime employment, including repairing a vessel, who are injured on navigable waters or an adjoining pier, wharf, dry dock or similar area. A mechanic who sea-trials a customer’s boat, a rigger stepping aboard, or a repair crew working at a marina can meet that test. The fix is usually a USL&H endorsement on your workers’ comp policy, priced off the share of payroll with federal exposure. Failing to secure Longshore coverage when it is required is a federal misdemeanor under 33 U.S.C. 938, with fines up to $10,000.
Because the marina is transferring its risk to the trades that work on its docks. A typical marina or shipyard vendor package requires at least $1M of general liability, a marine general liability endorsement so the policy actually responds to waterfront work, USL&H certificates when your crew works over the water, and additional insured and waiver wording in the marina’s favor. No certificate, no gate access — which is why the certificate requirements, not the premium, are usually what sends an artisan shopping.
Small-shop artisan packages are written at minimum premiums — shipwright and boat-repairer packages start at minimums from about $1,500. Where the work carries real federal exposure, USL&H programs start at minimum premiums around $10,000, so the honest answer depends on how much of your payroll works on or over the water. We frame the cost once we see your trade, your receipts and your land-versus-water payroll split — the split is the biggest lever on the comp price.
Usually not for damage to the boat itself. Standard GL excludes property in your care, custody or control, and it also excludes injury and damage from watercraft you own or operate beyond a narrow exception for small non-owned boats. Damage your work causes to other property is one thing; the customer’s vessel on your stands is another. That gap is closed with ship repairer’s legal liability and, for waterfront operations, marine general liability.
Marine coverage: Marine contractors insurance New York · Marine general liability · USL&H / Longshore insurance · Dock builders insurance
Your team & your shop: Workers’ compensation in New York · NYC contractor insurance hub · Get a quote
See our guides first when you search: add NextGuard to your Google preferred sources.